Attention. Install the jack and stands in the places provided for this.
Examination
1. Stop the vehicle on level ground and check that the oil is at the bottom edge of the filler hole.
2. If the oil level is low, add the recommended Honda Genuine Ultra ATF oil to the lower edge of the filler hole.
3. Install a new aluminum washer and tighten the filler bolt.
Replacement
1. Stop the car on level ground, unscrew the filler bolt and remove the aluminum washer.
2. Unscrew the drain bolt, remove the aluminum washer and drain the old oil.
3. Install a new aluminum washer and tighten the drain bolt.
4. Fill with the recommended Honda Genuine Ultra ATF through the filler hole to the bottom of the filler hole.
5. Install a new aluminum washer and tighten the filler bolt.
Recommended oil:
Honda Genuine Ultra ATF
Quantity:
- 1.2 l after repair
- 1.0 l at oil change
Attention. After repair, check the operation of the 4WD system (see above), check the oil level again and top up if necessary.
