PGM-Fi Main Relay Test

1. Remove the PGM-Fi main relay from the back of the front console.

2. Connect (+) battery to pin #2 of the PGM-Fi main relay, and (-) battery to pin #1 and make sure there is continuity between pins #5 and #4.

3. Connect (+) battery to pin #5 of the PGM-Fi main relay, and (-) battery to pin #3 and make sure there is continuity between pins #7 and #6.

4. Connect (+) battery to pin #6 of the PGM-Fi main relay, and (-) battery to pin #1 and make sure there is continuity between pins #5 and #4.


If there is no continuity, replace the PGM-Fi main relay.