2. Remove the case (A) clutch release fork from clutch housing (IN).
3. Remove the clutch release fork (WITH), squeezing the spring with pliers (D).
4. Remove release bearing (E).
5. Install special tool (A) to secure the flywheel.
6. Install special tools (A and B) for disc centering.
7. Loosen the bolts (D) alternately one turn to ensure that the spring is fully released from precompression.
8. Remove the bolts (D) fasteners and remove the clutch cover (E) with clutch disc.
9. Remove the clutch disc (A) and special devices (B and C) for disc centering.
10. Loosen the flywheel mounting bolts in several passes and remove the flywheel.
11. Using special tools (B and C), remove the thrust bearing (A) transmission input shaft from the flywheel.
Caution: Do not remove the bearing unless you are replacing it.
