![]() | ![]() |
2. Disconnect socket And the gauge 2 of temperature of a working liquid (ECT), then disconnect the air conditioner clutch connector B and the wire harness retainer C from the air conditioner condenser fan housing.
3. Disconnect the connectors A of the fan motor and remove the clamps of the wiring harness B.
4. Remove the two screws C securing the condenser fan shroud, then remove the condenser fan shroud assembly.
5. Turn out two bolts D of fastening of a casing of the fan of a radiator, then remove a casing of the radiator fan in gathering.
6. Remove the upper radiator hose A and the lower radiator hose B.
![](https://www.hondabook.ru/img/civic/2498.jpg)
7. Remove expansion tank hose A and wire harness retainer B.
8. Turn out two bolts With fastenings of the basis of a cover of a radiator, then remove the top brackets D of a radiator.
9. Lift radiator assembly A and remove bottom cushions B.
![](https://www.hondabook.ru/img/civic/2499.jpg)
10. Remove the upper radiator hose A, lower radiator hose B, radiator cap base C, ECT sensor 2 D, and drain plug E.
![](https://www.hondabook.ru/img/civic/2500.jpg)
11. Reassemble the radiator with new O-rings F.
12. Install the heatsink and fan shroud assembly in the reverse order of removal. Make sure the top and bottom cushions are securely fastened.
13. Fill in a radiator a cooling liquid and remove air from the cooling system.