![](https://www.hondabook.ru/img/civic/2946.jpg)
1. Remove the following parts:
- upholstery of the front wing;
- front emblem cover;
- shield covers.
2. Slightly loosen each bolt A.
3. Adjust the position of the hood in sequence.
Adjust the right and left sides of the hood, as well as the front and back, using the oblong holes in the hinges B of the hood.
Rotate the hood end cushions C as necessary to get the hood to fit snugly against the frame at the front and sides.
4. Adjust the hood latch D to achieve the desired height of the front edge, and move the hood latch to the right or left so that the tongue E is in the center of the hood latch.
5. Tighten the bolts to the recommended torque.
6. Check that the hood opens freely and closes securely.
7. Apply automotive paint to the hinge mounting bolts and around the hinges and allow to dry.
8. Apply universal grease to the places indicated by the arrows of the lock and hood hinges.
![](https://www.hondabook.ru/img/civic/2947.jpg)
9. Reinstall all removed parts.