Car manual transmission Honda Civic 6

Manual Transmission Specifications
5-speed manual gearbox. Tightening force of threaded connections, Nm Connection type Meaning The lower bolts of fastening of a back part of the engine to a transmission Self-locking bolt 118 Non-self-locking bolts 64...

5-speed manual transmission — general information
The vehicles covered in this manual are equipped with a 5-speed manual gearbox (RKPP), 4-speed automatic transmission (AT), or continuously variable automatic transmission (CVT). Civic models of all years of production...

Replacement of power shaft seals
Gear oil leaks are most often associated with wear or mechanical damage to the drive shaft seals. Replacing the oil seals is quite simple and does not require removing the transmission from the car. 1. Oil seals are...

Check of a condition and replacement of a support of a transmission
1. Jack up the front of the car and place it on jack stands. 2. Insert the point of a pry bar or a large screwdriver between the reaction arm of the support and the frame and try to move the assembly (see accompanying...

Removal and installation of draft of a drive of a gear change
Shift Drive Components 1 - Gear lever handle; 2 - Mounting bracket of the torque rod of the lever; 3 - Bushing of the tip of the jet rod; 4 - Cuff of the tip of the jet rod; 5 - Mounting clamp; 6 - Spring pin (to be...

Check and replacement of the gauge-switch of reversing lights
Examination 1. First of all, check the condition of fuse No. 19 at 7.5 A in the mounting block located under the instrument panel. 2. Select reverse gear with the shift lever and turn on the ignition - the white reverse...

Removal and installation of mechanical transmission
Withdrawal 1. Disconnect the negative cable from the battery. Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct...

Overhaul of manual transmission — general information
The compilers of this Guide do not recommend car owners to undertake the overhaul of manual transmissions on their own. During the disassembly and assembly procedures, the gearbox has to be removed and then replaced...