Tightening torques for threaded connections (Nm)
Automatic transmission
CR-V and Odyssey 2.2/2.3L models | |
Starter mounting bolt | 44 |
Bolt of fastening of a case of transmission | 65 |
Bolt of fastening of an arm of a back support of the engine to a case of transmission | 54 |
Rear Support Through Bolt | 64 |
Suction manifold bracket bolt | 22 |
Nut of fastening of transmission | 38 |
Bolts of the central beam of the subframe | 50 |
Transmission Support Through Bolt | 65 |
Bolt of fastening of the hydrotransformer to a leading disk | |
1st stage | 6 |
2nd stage | 12 |
Shift cable retaining bolt | 14 |
Shift cable retainer bolt | 18 |
Torque Converter Cover Bolt | 12 |
Odyssey V6 | |
Lower transmission mounting bolt | 38 |
Bolt of fastening of transmission to the engine | 64 |
Front Support Bracket Bolt | 38 |
stiffener bolt | 38 |
Bolt of fastening of the hydrotransformer to a leading disk | |
1st stage | 6 |
2nd stage | 12 |
Shift cable locknut | 22 |
Manual transmission
CR-V | |
Transmission mounting bolt | 64 |
Rear Support Bolt | 83 |
Gearbox mounting bolt | 64 |
through bolt | 74 |
Upper transmission mounting bolt | 54 |
Bolt of fastening of a forward support to an arm from outside the engine | 64 |
Frame bolt | 44 |
Bolt of fastening of the central beam of a crossbar | 50 |
Bolt of fastening of the amplifier to transmission | 44 |
Bolt of fastening of the amplifier to the engine | 24 |
Intermediate shaft bolt (axes) | 39 |
Suspension yoke pinch bolt | 43 |